Heat Pump Repair in Tempe Backed by a 100% Satisfaction Guarantee*

A lack of system maintenance can cost you. On average, an inefficient heat pump could eat up to 10 to 25 percent more energy, based on findings from the U.S. Department of Energy. It’s also more likely to become damaged or fail prematurely.

Troubleshooting Your Heat Pump Problem

Heat pump not running right? Check out our list of common problems below.

• No Heat. Make sure your thermostat is positioned to “on” and “heat.” A circuit breaker may have tripped, but in some cases it’s because the thermostat itself doesn’t work with heat pumps.
• Insufficient heat. Dirty filters, fan and coils may restrict airflow and wreck your system. Replace the system’s air filter every month or so, avoid letting the coils and fan get dirty, and remove yard debris that may have accumulated around it. Your system could also be dealing with clogged ductwork, damaged valves or poor refrigeration flow.
• Cold air instead of heat. Heating that comes from a heat pump won’t be as warm as a standard, forced air type of furnace. But if things still feel too cold, switch the thermostat to emergency heat and at least 5 degrees above the inside temperature. If warm air is still the result, there may be a problem with the system’s outdoor unit. Cold air means there’s probably an issue with the thermostat or air handler. Your system may have also gone into defrost mode so it can avoid freezing. If you’ve recently seen frost or ice sitting on the outdoor coil, the system could have a defective defroster timer or control module, or you may have a refrigerant leak, reducing the total supply.
• Heat pump starts and stops often. Change your air filter and then monitor your thermostat, in case it has to be recalibrated or it requires new batteries. If it’s cold and your system is on all the time, the thermostat may be set too high. Also, some heat pumps start to struggle around 25 to 30 degrees Fahrenheit.
• Rattling, grinding or squealing sounds. If you hear a rattling sound, you may need to tighten the cover panels. If you hear noises you’d describe as scraping, grinding, squeaking or squealing, turn off your system and contact Orangutan Home Services. Those noises may indicate a serious problem.

From big repairs to minor fixes, Orangutan Home Services is ready to help. Once we have your heat pump heating and cooling again, consider enrolling in a regular maintenance membership plan. Annual visits can help you minimize costly repairs while also enhancing your system’s energy efficiency.